Swivelling Desk Extension (405mm x 300mm) for round desk feet with 32mm diameter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Swivelling desk extension for desk to use with e.g. flatbed scanner. For round desk foot with 32mm diameter.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 32
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
Motivation
[ swivelling desk extension for flatbed scanner ]
On my desk I need to use a flatbed scanner from time to time to scan documents.
The scanner is only used occasionally, but uses up quite some desk space.
When working with the scanner, I wanted to have an extendable desk part with the scanner placed on it within close range, that easily could be accessed or hidden away when not used.
The material recommended is PETG, as during usage the brackets have to support the desk extension with load placed on it.
When slicing, be aware that a high load will act on the parts ... I printed them with 10+ perimeters to get stable parts.
The design allows printing without supports, but I recommend a 8mm brim.
Printed with SUNLU PETG (Black).
[ Parts A, B, C, D, F ]
1x SDE_Part_A_v11.stl
1x SDE_Part_B_v11.stl
1x SDE_Part_C_v10.stl
1x SDE_Part_D_v10.stl
(support: none)
(brim: recommended)
(print orientation: top face of part facing down)
(colour: Black or as you like ;-)
2x SDE_Part_F_v00.stl
(support: none)
(brim: recommended)
(print orientation: bottom face of bracket down)
(colour: Black or as you like ;-)
[ Part_E ]
3x SDE_Part_E_v00stl
(support: yes)
(brim: not necessarily needed)
(print orientation: side face of bracket down)
(colour: Black or as you like ;-)
Material list
Printed part list:
1x SDE_Part_A_v11
1x SDE_Part_B_v11
1x SDE_Part_C_v10
1x SDE_Part_D_v10
3x SDE_Part_E_v00
2x SDE_Part_F_v00
Table board
1x Board
405mm x 300mm board (e.g. 18mm thickness)
+ 35mm x 35mm cutout at corner
Screws
6x M5x16 allen hex bolt
6x M5x20 allen hex bolt
12x M5 nut
6x M5 washer 10x1
For this project I used: https://www.amazon.de/dp/B0FH1P4SXW?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
6x 4.0x20mm wood screw (e.g. SPAX)
Assembly
Step 1:
Pull M5 nuts into Part-A cut-outs.
Use M5 nuts (2x)
They will not ba accessible later in the assembly process and must be in this position for the final assembly step.

Step 2:
Assemble the desk extension support structure.
Use the M5x20 allen hex bolts (6x), washers (6x), M5 nuts (6x)

Step 3:
Gest the desk extension board.
Board dimensions 405mm x 300mm.
Make a 35mm x 35mm cutout for the leg of the desk.
Fix the board using 4.0x20 wood screws (6x).

Step 4:
Mount the extension desk support ring on the desk leg.
Use M5x16 allen hex bolts (2x) and M5 nuts (2x).

Step 5:
vvv

Step 6:
Use it!!!
