Disposable Tuna Can lid (fits 3 5/8 inch cans - 85.7mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
0,41 € – 0,50 € netto (bez VAT)
Dla pliku: tuna can lid_0.4n_0.2mm_PETG_MK4S_14m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,46 € netto (środek widełek).
- Masa podana przez autora
- 11 g
- Czas druku podany przez autora
- 14,4 min
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
My wife loved the pumpkin can lid and asked for a tuna can lid. Disposable fast PETG print.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 115
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Sometimes you have left over tuna or water chestnuts and don't use the whole can. Print one of these in PETG (dish washer safe) and it snaps easily onto the can. Extended flanges on two sides make it easy to remove. Rated disposable because no FDM prints are food-safe for reuse due to the small gaps between the lines. Recommend PETG because it is flexible and dishwasher top shelf safe - PLA is too brittle and will spit, and cannot be washed in a dish washer).
No supports required. Recommend 100% infill to minimize layer gaps that can trap oils and food residue.