1 / 6
Skullpkin Candy Bowl with Lid | Halloween Candy Holder | Multicolor STL & 3MF | #SAVFX — zdjęcie 1
1 / 6

Skullpkin Candy Bowl with Lid | Halloween Candy Holder | Multicolor STL & 3MF | #SAVFX

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Add a spooky centrepiece to your Halloween party with this Skull Pumpkin Candy Bowl,

Ocena
0 / 5
Polubienia
13
Pobrania
27
Wydruki
0
Wyświetlenia
93
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

🎃 Pumpkin Skull Bowl
🌿 Removable Pumpkin Lid

The bowl has a large internal cavity for holding Halloween candy, treats and small accessories, while the removable lid gives the model a complete pumpkin appearance when not in use.

The model was created using ZBrush and 3ds Max, combining detailed sculpting with a production-ready 3D-printing workflow.

#SAVFX

🎨 MULTICOLOR / SINGLE COLOR

The model can be printed either as a single-color Halloween decoration or as a multicolor 3D print.

The skull, pumpkin body, stem and decorative elements can be assigned different filament colors depending on your preferred look.

The included 3MF setup can be used for convenient multicolor printing, while STL files are provided for flexible slicing and customization.

Possible color combinations include:

Orange + Bone
Orange + Black
Orange + Green + Brown
Orange + Bone + Green
Single-color Halloween pumpkin
Custom multicolor combinations
📏 SIZE

Complete assembled size:

Length: 175 mm
Width: 160 mm
Height: 190 mm

Bowl without lid:

Height: approximately 112 mm

Internal bowl capacity:

Internal diameter: approximately 125 mm
Internal usable height: approximately 85 mm

The model is fully scalable.

You can print it approximately 20–30% smaller for a more compact candy bowl, or scale it larger according to the available build volume of your 3D printer.

🍬 PERFECT FOR
Halloween candy bowl
Trick-or-treat candy holder
Halloween party decoration
Halloween table centerpiece
Pumpkin decoration
Skull decoration
Halloween home decor
Candy and treat storage
Halloween party props
Spooky tabletop decoration
Seasonal 3D printing projects

The competition currently runs from September 15, 2026 through November 15, 2026. Cults states that participating models must be new, original, free and exclusive to Cults.

#SAVFX Enjoy printing and have a spooky Halloween! 🎃💀

🖨 PRINTING & MANUFACTURING

The model has been checked and sliced in Bambu Studio to verify the geometry, part separation, orientation and printability.

The provided Bambu Studio previews show the recommended printing arrangement and slicing results.

The model has not been physically printed by me yet. It has been professionally modeled and checked through the digital slicing workflow.

Because print results can vary depending on printer, filament, nozzle, scaling and slicer settings, the following settings are recommended as a starting point rather than a guaranteed universal profile.

#SAVFX

PRINT RECOMMENDATIONS
Recommended technology

FDM / FFF 3D Printing

Recommended material

PLA / PLA+

PETG may also work, although PLA/PLA+ is recommended for the detailed decorative surfaces.

Layer Height

0.12 mm

Recommended for preserving the skull and pumpkin sculpting detail.

You can use:

0.12 mm: Best detail / recommended
0.16 mm: Faster printing with good detail
0.20 mm: Faster prototype printing
Nozzle

0.4 mm recommended

A smaller nozzle can be used if you want additional detail, but is not required.

Walls

3–4 walls

Recommended for a strong and durable bowl.

Infill

15–20%

For normal use.

For a heavier-duty bowl, approximately 20–30% can be used.

Supports

Minimal supports required.

Supports should only be used where necessary for the specific orientation and printer profile.

The majority of the bowl is designed to print without extensive support structures.

Print Orientation

Bowl:

Print the bowl upright with the open cavity facing upward.

Lid:

Print the lid separately in the recommended flat/stable orientation shown in the provided slicing setup.

Multicolor

The model can be printed:

Single color → simplest setup

or

Multicolor → recommended for the skull/pumpkin effect

The 3MF file provides a convenient starting point for multicolor printing.

SCALING

The model is designed to be scalable.

Smaller version

Approximately 20–30% smaller can be used when a compact candy bowl is preferred.

Larger version

The model can be enlarged as much as your 3D printer's build volume allows.

When scaling significantly, keep in mind that increasing the model size will also increase:

Print time
Filament consumption
Support requirements
Overall weight

For best results, keep the bowl and lid at the same scale so they remain compatible.

IMPORTANT PRINTING NOTE

This model was professionally created and digitally checked in Bambu Studio, including the separate bowl and lid geometry.

However, no physical print test has been performed by me yet.

The supplied settings are therefore recommended starting points based on the model geometry and slicing results. Actual results may vary depending on printer, filament, nozzle, cooling, slicer profile and scaling.

Tagi