Case for Adafruit Matrixpanel and Matrix Portal S3 Board
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
All you need to put the adafruit led matrix 32x32 and the adafruit board into one unit.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
If you need to put the adafruit matrix 32x32 and the adafruit Matrix Portal Baord S3 board into one unit, then this case is for you.
Designed for the MOD75 LED Matrix 32x32pixel with 5mm pitch from Adafruit
or any compatible LED matrix with 160mmx160mm dimensions
For assembly required:
6 screws M3x10
4 self-tapping screws 1,5x4 mm
The Case is printed in PLA - no supports required.
Button_set should be printed in PETG with a very fine layerhight to ensure a longer lifetime. But you can also omitt the button_set and use a toothpick or something else to press the buttons from outside
STEP Files are provided for easy remixing - just in case you want to add STEMA QT Board ;-)