ColorMix CMYKW Swatches
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted an easy reference to know which combinations create which colors with my specific filaments!
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 178
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial
I've really been enjoying using ColorMix so far, but I wanted to have a collection of swatches so I would know exactly what combinations achieve what colors with my specific filaments. Similar usage to the Calibration Cones, but these have the combinations etched on for easier reference.
The 3MF files already have the correct colors set up. They are oriented to need the least amount of supports to reduce print time, however that can result in some minor warping. For less warping, add more supports! Try to keep the ~45 degree angle, as ColorMix doesn't work as well on flat prints (explained much better in the official Prusa article)
The point of these models is that you can get a baseline for ColorMix with whatever filament you already own, but if anyone is curious I used ZYLTech PLA in Light Blue, Hot Pink, Yellow, Glossy Black, and Milky White.