Ocean Themed Coasters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Single Extruder Multicolor Print
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a set of 3 Ocean Themed Coasters. They can be printed in multicolor with a single extruder by inserting a pause during the print and changing filaments. If you want a holder for your coasters, I reccomend this one Coaster Holder, The Ocean Coasters are exactly the same size as the one's used in the linked model, so the holder works perfectly.
Instructions (Assuming that layer thickness is at 0.2):
The coasters are 5mm thick. The base (shown in cyan) is 2mm thick, meaning that the design (Shown in blue) will start at the 11th layer. This means that the pause must be inserted before the printer begins with the 11th layer. Then you can change the filament to your desired color, and resume printing.
I recommend using a brim to avoid warping and adhesion issues.
Happy printing! And make sure to upload your makes and give feedback (: