Kubus 4 decoration ring
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Elevate your By Lassen Kubus 4 candleholder with this organic, parametric Voronoi ring insert.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 94
- Wydruki
- 0
- Wyświetlenia
- 243
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
Elevate your By Lassen Kubus 4 candleholder with this organic, parametric Voronoi ring insert. Designed to drop neatly into place around the candleholders, this base accents the strict geometric lines of the Kubus with a natural, cellular pattern while catching light and stray wax drips.
The ring measures 215 mm outer diameter, 105 mm inner opening, and has a slim 4 mm thickness.
Print Settings
Print Bed Requirement: 220 × 220 mm minimum (Fits Bambu Lab X1C / P1S / P1P / A1)
Base Profile: 0.20 mm Standard
Wall Generator: Arachne (essential for clean, continuous slicing across thin Voronoi bridges)
Wall Loops: 3 (ensures solid perimeters across all struts)
Sparse Infill: Gyroid (15%–20%)
Supports: None needed
Filament Recommendations: PLA, Matte PLA, or PETG (Matte Black or White complements the original Kubus powder coat)
Disclaimer:
This is an independent, aftermarket decorative accessory. It is not affiliated with, endorsed by, or sponsored by By Lassen, Audo Copenhagen, or any associated brand.
Ensure candles are never burned unattended down to the printed base. Thermoplastics will deform or melt under direct contact with flames or pooling hot wax.