Ultralight Gridfinity for Samla 5L
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ultralight adapter to create the perfect snug fit of a 4x3 gridfinity baseplate inside a 5L Samla box.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Bring down your filament usage compared to the original and add the recognizable honeycomb pattern to your Gridfinity Samla boxes!
I love the Samla boxes IKEA makes, finally I can see everything (and therefore remember it exists)! But Samla boxes get expensive if you buy many of them and unless you don't mind rummaging in boxes filled to the brim, you will need many of them.
I often find myself wanting to put similar things together in one box, but not mix them. Gridfinity comes to the rescue!
Printing the original adapter would quickly add up in terms of filament consumption and printing time, so I made this remix of a remix :)
With just 14.3 grams per adapter you save half of the filament and can print both adapters in the time it takes to print just one of the original design.
I use this together with the also time and filament-saving minimal variant of a gridfinity baseplate, of which I uploaded the correct variant that goes together with this adapter. It should be compatible with most other baseplates too though.
Have fun organising everything into neat little boxes!