platform jack remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
i remixed this to fix the problem with the printing of the upper parts that need support to keep from sagging and…
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 331
- Wydruki
- 3
- Wyświetlenia
- 1223
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
i remixed this to fix the problem with the printing of the upper parts that need support to keep from sagging and stringing.and bending etc. the supports/braces are meant to be be broken off after printing. but only the middle one need to actually be broken off.
a note by maker ssvenn:
use a large brim to make sure it doesn't detach during printing.
i made 2 versions:
1 without a hole in top and bottom, and another with holes. i also made holes in the top and bottom to lessen print time and filament waste.
Category: Hand Tools