Fortum 4770667 2-in-1 Rivet Adapter Case Inlay
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Laservorlage (SVG, AtomStack-Projekt & G-Code) für Koffer-Inlay des Fortum 2-in-1 Nietaufsatzes 4770667 15mm PE-Hartsch.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 7
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Kostenlose Laservorlage (SVG, AtomStack-Projekt & G-Code) für ein passgenaues Koffer-Inlay des Fortum 2-in-1 Nietaufsatzes (Modell 4770667).
Optimiert für 15 mm PE-Hartschaumplatten (Platten mit härterer, laminierter Oberschicht).
Getestet auf einem 10W Mecpow-Lasermodul:
- Leistung: 90 %
- Geschwindigkeit: 250 mm/min
- Durchgänge: 1 (Schnitt geht sauber in einem Rutsch durch)
Tipp: Schaumstoff mit der laminierten Seite nach oben in den Laser legen. Wenn nötig, den Fokus 2-3 mm tiefer ins Material setzen für absolut gerade Schnittkanten.
Free laser cut template (SVG, AtomStack Project & G-Code) for a custom foam inlay / shadowboard for the Fortum 2-in-1 Rivet Adapter (Model 4770667).
Optimized for 15mm PE hard foam sheets (laminated top layer).
Tested with a 10W Mecpow laser module:
- Power: 90%
- Speed: 250 mm/min
- Passes: 1 (clean cut in a single pass)
Tip: Place the foam with the laminated side facing up. If necessary, lower the focus 2-3mm into the material to get perfectly vertical edges.