ZK-4KX Power Supply with Fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bench ZK-4KX power supply module, with a 3D-printed case and a fan that runs only when module gets warm
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 37
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- CERN Open Hardware Licence Version 2 - Strongly Reciprocal
The ZK-4KX is a cheap buck-boost panel module (5–30 V in, 0.5–30 V / 4 A out) that runs hot when you push it. This project turns it into a closed bench supply: a 3D-printed case, a DC jack input, a power switch, 4 mm banana outputs, and a small add-on board that drives a 30 mm fan. The fan stays off until the module's heatsink reaches a temperature you set with a trimmer, then speeds up as it gets hotter. The board is single-sided and through-hole, designed to be etched at home; Gerbers are included if you'd rather order it.
Source files, build guide and updates: github.com/CatalinSerafimescu/ZK-4KXPowerSupplyWithFan