Jasper the Gem Crocodile | Prusa INDX ColorMix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cute crocodile with jade, teal and aquamarine gem scales. Painted INDX ColorMix 3MF and 120 mm STL included.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 28
- Wydruki
- 1
- Wyświetlenia
- 69
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Meet Jasper, a little crocodile with a treasure on every scale.
A friendly smile, chunky feet and a gently curved tail make him a cheerful desk companion. His gem-like scales combine green, teal and aquamarine with a soft mint body. Jasper joins Pebble and Mica in the Geode Creatures family.
V2 — Improved ColorMix palette
Added 21 October 2026: simpler green and teal scale mixes, soft aqua accents and a neutral white underside. The new real-print cover photo shows V2. Choose the V2 — Improved ColorMix folder for this palette, or choose V1 — Original colours for the earlier palette. The shape and 120 mm size are unchanged; the STL works for both versions.
What’s included
Painted INDX 8T ColorMix 3MFs: editable PrusaSlicer projects with the virtual colours and print settings prepared. Original and V2 palettes are both available.
120 mm STL: the same shape and size for your own printer or colour scheme. Colour assignments are stored in the 3MF.
Size: approximately 44 × 120 × 23 mm. Jasper is a static figurine, with no assembly required.
Printing Jasper
The prepared projects use a Prusa CORE One INDX 8T with a 0.4 mm HF nozzle, 0.10 mm layers, 2 perimeters and 10% gyroid infill. Keep his broad underside on the bed. Snug supports are enabled for the raised snout; remove them gently after cooling.
Open the 3MF as a project and match the filament slots: 1 Cyan, 2 Magenta, 3 Yellow, 4 White, 5 Black. V2 uses only Cyan, Yellow, White and Black; tools 2 and 6–8 are unused.
At 120 mm, the V2 project estimates about 4 hours in normal mode or 4h46m in silent mode, using approximately 42 g of filament. Actual colours depend on your filament and lighting.
Try your own gemstone palette and share a make—we’d love to see Jasper’s next colour adventure!
Licence
CC BY-NC-SA 4.0. Free for non-commercial printing, sharing and remixing with credit. Shared adaptations must use the same licence. Contact the creator for commercial permission.