1 / 5
Fiat 500L Steering Wheel Adapter for Fiat Ducato X230 (1994–2001) — zdjęcie 1
1 / 5

Fiat 500L Steering Wheel Adapter for Fiat Ducato X230 (1994–2001)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fit a Fiat 500L steering wheel to a 1994–2001 Fiat Ducato X230 including a solution for retaining the horn.

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
79
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Fiat 500L Steering Wheel Adapter for Fiat Ducato 1994–2001

To install a Fiat 500L steering wheel on a 1994–2001 Fiat Ducato, you will need this modified plastic part if you want the horn to function.

The original black plastic part that holds the metal horn contact ring does not fit the Fiat 500L steering wheel. If you don't need the horn to work, the 500L steering wheel can otherwise be installed without any modifications.

Modifying the Horn Contact Ring

Remove the metal (gold-colored) horn contact ring from the original Ducato steering wheel. Using a rotary tool such as a Dremel, carefully enlarge the hole in the center of the ring so that it fits over this adapter.

Once modified, install the ring onto the adapter and push the adapter all the way down into the 500L steering wheel.

The small clips that originally hold the metal ring in place are very brittle. You may not need them, as the friction between the ring and the adapter should be enough to keep it securely in place. Alternatively, you can glue the "wings" of the ring to the adapter.

Installing the Adapter

When installing the adapter and steering wheel, make sure that the locating pin on the Ducato steering column engages with the slot on the opposite side of the rectangular section of the adapter.

3D Printing

Print the adapter with supports.

The flat side of the model — the side containing the rectangular section that fits into the slot in the 500L steering wheel — should face the build plate.

I printed the adapter using PETG with print settings optimized for increased strength.

Horn Wiring

To make the horn work, connect a ring terminal and wire to one of the three black screws on the Fiat 500L steering wheel. This provides the ground connection for the horn.

Then:

  1. Connect the wire from the gold-colored horn contact ring to one of the two thin wires on the airbag.

  2. Connect the ground wire from the steering wheel to the remaining thin airbag wire.

  3. DO NOT connect anything to the connector in the center of the airbag. This connector is part of the airbag deployment circuit and is not used for the horn.

Important Wiring Warning

Make sure the wire coming from the gold-colored horn contact ring does not touch any other metal parts of the steering wheel.

The metal components of the 500L steering wheel are grounded. If the wire from the horn contact ring touches one of these grounded metal parts, it will bypass the horn switch and cause the horn to sound continuously.

Double-check the wiring and make sure the horn-contact wire only makes electrical contact with the appropriate horn connection on the airbag.

Tagi