1 / 1
Самосвальный прицеп для трактора | Dump trailer for a tractor — zdjęcie 1

Самосвальный прицеп для трактора | Dump trailer for a tractor

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Прицеп для трактора полесье

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
14
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Noncommercial

Прицеп с откидным кузовом для трактора полесье.

На дышле нет штыря. Я использовал винт м6.
Модель колес использовал из интернета и усадил на винты 2.5 мм шириной и 60 мм длиной.
В процессе печати добавил пару вырезов под магниты что бы кузов держался надежнее.


Хотел сделать упор для поднятого кузова но руки не дошли

________________________________________________________________________

A trailer with a hinged body for the Polesie tractor.

There is no pin on the drawbar. I used an M6 screw.
I used a wheel model from the internet and mounted it on screws 2.5 mm wide and 60 mm long.
During the printing process, I added a couple of cutouts for magnets so that the body would hold more securely.
I wanted to make a support for the raised body, but I never got around to it.

Tagi