Vileda Infinity Flex Wing Joint
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rotating joint piece for Vileda Infinity Flex cloth dryer
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 15
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Public Domain
The original joint broke likely due to something heavy being on it, plus UV damage from having the dryer outside.
The other models I've found didn't fit very well so I made my own.
The rotating part is 59mm in diameter, which in my case is the perfect slip fit. I printed it out of Extrudr PCTG anthracite to make it sturdy and match in color.
The hole for the wing part is 16.6mm, little bit of electrical tape can be used to make the fit more secure. It's slightly offset from the design's center plane to make the wing fit and be in center, but it's unlikely to be perfect without adjustment of the tubing.
As it is the wing sits at roughly 35-40 degrees from horizontal, in the F360 file the stop angle may be adjusted.