1 / 5
Royality Line pot handle
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replace your ever-cracking handles with this part
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 10
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Keep all the pot handle parts. You'll need them.
Dismantle the cracked thermometer part and extract the bronze insert.
Saw off the non-threaded end of the bronze insert just so that both ends are threaded.
Apply some threadlocker to the top half of the screw.
Screw on the bronze insert so one half rests on the thread-locked screw.
Wait at least an hour, possibly a day, for the threadlocker to harden.
Get a sufficiently long M5 screw, cut it to size, and fasten the 3D-printed part with it.