Drain drip tray for Lelit Anita espresso machine
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to allow a drain to be installed in your Lelit Anita espresso machine.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 19
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to install a water line and drain in my Lelit Anita espresso machine, so I designed this replacement drip tray that allows a drain tube to be installed. It catches drips and overflow, channeling them down to a drain hole. This allows you to install a 5/8" ID tube for a drain. Note that you’ll have to drill a hole in the back of the machine for the tube (line the hole with a rubber grommet), but no other modifications required. Retains the original stainless steel drip tray cover plate.
Recommended Print Settings:
Material: use a heat-tolerant filament like PETG or ASA
Infill: 5% Gyroid
Supports: Tree supports
Orientation: Print front face down
Print this accessory today and upgrade your coffee setup!