1 / 4
Jujutsu Kaisen Sukuna Lightbox / Dual-Lit HueForge Portrait
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Jujutsu Kaisen Sukuna Lightbox / Dual-Lit HueForge Portrait
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm
This print uses 3 unique filaments
Swap Instructions:
Start with Red
At layer #10 (0.88mm) swap to Black
At layer #22 (1.84mm) swap to White for the rest.