1 / 7
BRANCA R59 – AI-designed Ender 3 Pro extruder (reuses your stock hardware) — zdjęcie 1
1 / 7

BRANCA R59 – AI-designed Ender 3 Pro extruder (reuses your stock hardware)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

AI-designed Ender 3 Pro extruder body and arm in native Fusion, built around the stock hardware you already have.

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
30
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

BRANCA R59 replaces the plastic body and idler arm of the SainSmart / Creality Ender 3 Pro single-gear extruder with four printed parts. It keeps your original motor, brass drive gear, 624U grooved idler, spring and screws. The only things you add are 2 M4 heat-set inserts and 2 push-fit collets with clips.

It was modeled by GPT Astra (Codex working through the AI Make Fusion MCP) as a fully parametric Fusion design, and the full build video is coming to the AI Make YouTube channel (@aimaketech).

Honest status: the design has been checked digitally for fit, clearances and motion, but it has very few print hours on it so far. Treat it as an early release, not a proven long-term part. If you print it, I'd love to hear how it runs: make it, post it, remix it and improve it.

What's included

- STL and STEP for each of the 4 parts (mm, already oriented for printing)

- Editable Fusion file (BRANCA_R59.f3d)

- 10-page printing and assembly guide (PDF)

- BOM, hardware reuse notes and print settings

- License and attribution files

Hardware

Reused from one stock Ender 3 Pro extruder: NEMA 17 motor, brass drive gear with grub screws, 624U idler, spring, M3x18 pivot screw, M3x10 motor screws (2 pan, 1 countersunk), M4x8 axle screw, M4x12 adjuster screw, M3x10 rivnut, PTFE tube.

Added: 2x Ruthex RX-M4Sx4.0 short heat-set inserts, 2x 4 mm PTFE collets with retaining clips.

Full list with notes is in BOM.csv.

PETG · 4 walls · 30% gyroid · 5 top / 5 bottom layers · manual supports (idler arm only)

- 01_body: white, mounting face down

- 02_idler_arm: blue, broad outer top down, manual supports

- 03_pivot_bushing: white, flange down

- 04_spring_carrier: white, closed rear face down

Print one of each. Don't scale a part to fix one fit; it changes the mounting pitch too.

Credits

Licensed under GNU GPL v3. Stock hardware reference geometry comes from Creality's official Ender-3 CAD (GPLv3), and the notice is included.

Tagi