Push2Get - Candy Machine

Push2Get - Candy Machine

Push2Get - Candy Machine is a candy machine that gives a candy when the push button pressed after filling the compartments with the candies

Model Parts And Diamentions:

1. Main Body : It is the main body of the candy machine with bottom area 146.131 x 200 mm and 240mm  height. it has 3 compartments of 61.330 x 72 mm with the depth of 125 mm. there are 3 cuboid shape holes to move buttons inside these holes with 61.330 x 15 .  ( middle compartment and cuboid hole  has width of 61.340 mm to manage total/3 ).

2. Push Buttons :  These are 3 push buttons of 81x60.930x 14.6mm with the padding of 0.2mm each side so that the buttons can move after assemble. the front area of buttons are a bit large to keep the buttons outside while pressing it

3. Assembly and User Guide : The model  will be printed in 4 parts and 2 rounds 1. main body and 2. push buttons

To assemble the model we need 6 rubber bands

After printing all parts separately we can attach each button with the body using 2 rubber bands ( getting fit between the body and the buttons ) to attach rubber bands there are nil shape structures in both main body and the buttons after attaching the rubbers we can use glue between rubber and the body so that rubber will not get pull out

After assembling all 3 buttons fill the compartments with candies now the machine is ready to use

4. Working: when some one pushes the button the button slides into the space and pushes a candy through out the gap and candy falls down and the rubber band stretches once the button releases rubber band takes its original shape and button comes up and another candy fills the empty space for the next press.