1 / 6
FlexReel — Modular Pegboard Storage System — zdjęcie 1
1 / 6

FlexReel — Modular Pegboard Storage System

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A modular, folding pegboard reel for extension cords, hoses, cables, rope & more. Two reel sizes, one common base.

Ocena
0 / 5
Polubienia
34
Pobrania
31
Wydruki
0
Wyświetlenia
285
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Garage
Licencja
Creative Commons — Attribution — Noncommercial

This modular reel uses a common base with two “finger” options, to accommodate small cords and cables up to larger items, like air hoses and shop vac hoses.

Both finger styles use the same base and hardware, allowing either style to be installed as needed.

Standard Reel: extension cords, rope, straps, cable

Deep Reel: air hose, vacuum hose, heavier cable

The fingers lock in at 180-degree detents by lifting and rotating accordingly.

See video for complete demonstration.

Printing Recommendations:

PETG (I used Sunlu Rapid Matte in gray and orange)

4 Wall Loops, 22% Gyroid Infill, Tree (auto) Default (Grid/Organic)

Hardware (for each) assembly

Qty

Description

Notes

1

1/4-20 UNC x 1-1/2”L partially threaded bolt

 

1

1/4-20 UNC nut

 

1

Compression Spring (approximately 1” to 1-1/4” x 5/16” OD)

Exact size not critical, I picked something from a hardware assortment suitable for the 1/4" bolt

Assembly:

1.      Insert bolt into finger lever, seating the head into the hex recess

2.      Insert finger lever/bolt into base and insert spring into recess on opposite side

3.      Screw the nut onto the bolt, compressing the spring as you tighten (nut will be flush with bolt)

4.      Use appropriate peg rivets for the thickness of your pegboard (metal, MDF, etc.). 

I have used either of these depending on material and thickness of pegboard:

https://www.printables.com/model/645943-lockable-14-inch-pegboard-rivet-stronger-remix

https://www.printables.com/model/47496-lockable-pegboard-rivet

I will stress that secure mounting of the base to the pegboard is essential, getting the proper size rivet is critical!

_____________________________________________________________________________________________________________________________

Need SKÅDIS version?  See below:

Tagi