Updated: Tesla Model Y (Pre-Juniper) Screen-Mount Sunglasses Holder – Snap-Together, No Glue
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clip-on bar for the Model Y center screen that holds sunglasses. It prints as 2 halves that snap together.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Updates:
Moved bar higher up so sunglasses are slightly visible to driver
slight reduction in length for better fit
Rounding edges
Description
Clip-on bar for the 2020–2024 (pre-Juniper) Model Y center screen that holds sunglasses. It prints as 2 halves that snap together, so it fits most print beds. No adhesive or tools needed.
Fit: 2020–2024 Model Y (pre-Juniper).
Features
Fits the 358.8mm-wide screen with 0.5mm side clearance
2-piece design (~190mm per half) for standard 220–256mm beds
The halves join with a keyed socket so they can't rotate, plus a snap catch that holds them together
Doesn't cover the screen or the camera area
Print notes
Printer: Prusa CORE One, 0.4mm nozzle
Filament: PETG. Use PETG or ASA, because PLA will warp in a hot car.
Profile: 0.20mm STRUCTURAL, with variable layer height
2 perimeters, 5 top / 4 bottom layers
30% gyroid infill
Supports: organic, touching the build plate only
Brim: 8mm, outer only
Print the halves in the orientation shown in the 3MF
Files: ModelY_SunglassBar_final.3mf, halfL.stl, halfR.stl, ModelY_SunglassBar_v3.FCStd