Skadis Paintbrush Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds an entire set of paint brushes
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 104
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Public Domain
Assembly is as straightforward as it goes. Print 1 brush holder, brush tip covers for the number of slots in the brush holder (default 8), and either 2 vertical risers or 1 Skadis Rack. The square holes connect, as seen in the photos, which may be glued if desired.
Parametric, can be found at https://cad.onshape.com/documents/9effe9efb0e2328fea2c1260/v/3b14158b69e3dd16b3b1f0f6/e/84e36f229a0daa2740aff09a?showReturnToWorkspaceLink=true .
Original T-nuts for the Ikea Skadis can be found here ( https://www.printables.com/model/228663-skadis-t-nuts-mounting-system-for-ikea-skadis-pegb ), however I couldn't find my M2.5 screws and had to use the T-nuts altered by Samuel Haberli ( https://www.printables.com/model/433318-ikea-skadis-t-nut-m3 )
Used the onshape FeatureScript by Paradox ( https://www.printables.com/@Paradox_2086101 ) to add the alignment guides for the M3 t-nuts I used for mine.