Loc-Line style adapter for Air Assist Air Pump for XTools F1 Ultra Laser Engraver for embosing.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to allow an Air Assist Air Pump to blow air across the item you are engraving/embossing.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
1/4" NPT female adapter to allow an Air Assist Air Pump to blow air across the item you are engraving/embossing.
Blowing air across your metal coin or slate coaster makes a big difference when you are embossing with a Laser Engraver. On the XTools F1 Ultra there is an entry point you can feed the air hose through, then you need to set the hose where you need it to blow, and I could not figure out a good way to do it, until I decided to make an adapter, that screws into the F1 Ultra plate, and the Loc-Line screws into it. The air hose is just a tight fit.
For Loc-Line 40413 Hose Sample Kit, Flex Hose System, 1/4 In Hose Inside Dia
https://www.amazon.com/dp/B0GWRTZ5YS
Ktondic Air Assist for Laser Engraver, 35 L/Min Pump for D1/D1 Pro
https://www.amazon.com/dp/B0CMXKLQCZ
I do not get commission on the Amazon links, they are just provided for your reference