1 / 3
Taposaur - Dinosaur Tape Dispenser — zdjęcie 1
1 / 3

Taposaur - Dinosaur Tape Dispenser

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A tape dispenser shaped like a dinosaur. Fits most standard sized tape rolls.

Ocena
5 / 5
Polubienia
47
Pobrania
61
Wydruki
1
Wyświetlenia
347
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Apache License 2.0

A fun tape dispenser that is shaped like a dinosaur! I made this model because I got tired of boring plastic tape dispensers. The print has a built-in sharp edge to cut tape, but depending on the nozzle width, it might not be sharp enough to cut tape.

Model is approximately 6.5" wide, 3.5" tall and 1" deep.

Printing Tips:

  • Designed for a single-color printer; for multi-color prints, slice each part individually.

  • 1 body should be printed, 2 eyes, 1 curved spine, and 2 flat spines.

  • If printing in a single color, print in white or another light color to make painting easier.

  • Best printed with supports enabled

Assembly/Use Tips:

  • Paint each part individually before gluing together. 

  • The eyes should be glued into the eye slots after being painted.

  • The curved spine should be painted and glued to the top curved section.

  • The 2 flat spines should be painted and glued to the flat part of the back.

  • After printing, it is recommended to sand the tape cutter to a sharper point.