Dual Sensor Smol v2 (HGX2.0) Extruders for NightOwl
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Smol v2 (HGX2.0) Extruders with Prep and Load sensors embedded for use in NightOwl
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
This is the Smol v2 extruder introduced with BoxTurtle v1.1. Hardware in the extruder is the same, with the addition of one more D2HW switch and MR63ZZ bearing.
To install this in your NightOwl, print one set of files mirrored. You will also need to invert the dir_pin on one lane. The included bottom plate is needed to mount the extruders. The extruders are angled towards the hub to improve the filament path.
Config change (per lane):
[AFC_stepper lane1]
rotation_distance: 54.5640483
gear_ratio: 44:10, 37:17Combine this with my other NightOwl mods:
Filamentalist FV3 Respoolers: https://www.printables.com/model/1577021-nightowl-filamentalist-fv3-mod
BoxTurtle v1.1 Hub/Buffer combo: https://www.printables.com/model/1864558-boxturtle-v11-hub-for-nightowl
BarfTurtle LEDs: https://www.printables.com/model/1864612-nightowl-leds-for-lane-indication
[alternative] Apex Extruders (dual sensor): https://www.printables.com/model/1865211-dual-sensor-apex-extruders-for-nightowl