BC-250 JF13K Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a Asrock BC250 case designed with support for the massive JF13K cooler.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 329
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- GNU General Public License v3.0
this is my BC250 case designed to fit the massive JF13K cooler.
and a HP server PSU.
Print Instructions
4 walls
10% infill is more than enough,
this print will have a lot of stress due to the massive size of the jf13k so I recomend ASA ABS or stronger.
PETG does not do well under stress and heat so print at your own risk. (ask me how I found that out.)
Note: this print is EXTREMEMLY sensitive to warping, warping will cause issue with the fitment.
Assembly
here's what required to assemble the case itself.
2x M3x10 ST screws
2x 13x16 ST screws
4x M3x6 screws (or PC screw, I find those much easier to screw in rather than normal ST screws.)
12mm push button.
Optional: a power controller. my firmware is avaible here:
https://github.com/ChokunPlayZ/BC-250-Ctrl
Note: this does not come with a side panel, I might make one, I might not, but there's a hole for it.