1 / 3
Balloon Giraffe Keychain
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added keychain loop to this balloon giraffe model from @fwilbanks238_1603935
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 37
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Printed in 40 min with 0.16mm layer height, 20mm/s outer wall, 40mm/s inner wall. 2 wall loops, 30% infill. You can obviously print quicker, but I slowed it down as it was a smaller model I wanted precisely printed as it was a gift for a friend. Using tree supports.