Pedal Bin Hinge – Bisagra para papelera con pedal
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spare hinge for pedal-operated trash bin. Prints flat, no supports. Check photos for correct orientation.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 6
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
### English
Spare hinge for a pedal-operated trash bin. I'm publishing this design in case it is useful to anyone who needs to repair their bin.
Check the pictures for the correct printing orientation. If you have any questions, don't hesitate to ask in the comments.
### Español
Se trata de una bisagra de repuesto para una papelera con pedal. Publico este diseño para quien le pueda ser útil para reparar su papelera.
Observe las imágenes para una correcta orientación a la hora de imprimir. Ante cualquier duda, no tenga reparo en preguntar en los comentarios.
---
### Print Settings / Parámetros de impresión
- Material: PLA+
- Nozzle / Boquilla: 0.4 mm
- Layer height / Altura de capa: 0.2 mm
- Nozzle temperature / Temp. boquilla: 200 °C
- Speed / Velocidad: 60 mm/s
- Infill / Relleno: 20–100 %
- Supports / Soportes: No