2014 Ford Focus ST front crank seal installer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple seal installer for front crank seal.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
A simple installer for the front crank seal on 2014 Ford Focus ST. My son was doing his timing chains and wanted to see if I could make him a seal installer. I designed 2 different ones, on for a 3/8 and 1/2 inch extension, depending on your situation. Printed them out of ASA with all walls so it was solid. You could try PETG but I can not guarantee how well it will work along with different settings. It was designed to allow for the shrinkage of the ASA so if you print it with different filament, maybe try a test one to make sure it will work for your material.