Flexi Capybara Skeleton
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Articulated Skeleton of a Capybara
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 212
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Autumn & Halloween
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Articulated Skeleton of a Capybara
Printed without any supports in two parts (body + head)
Model is based on a real skeleton but is greatly simplified for easier printing and using but still may not be suitable for novice users (you can use tips from the bottom)
Model made in Blender 3D without the use of any AI
---
If you want to help me in making more designs you can leave me a tip - check my LinkTree in bio
If you want to sell prints of this models you can buy a Commercial License
https://cults3d.com/en/3d-model/game/flexi-capybara-skeleton-commercial-license
Short video:
https://www.instagram.com/reel/DeEFhr-tRbi/
---
Printed with
0.2mm layer height
2mm brim
3 walls
0-10% infill
No supports
Good bed adhesion is needed. Glue on the bed plate is recommended
Good cooling is recommended (model is with bridges)
---
After a print you will need to break small conections on legs and lower spine
One spine segment is printed on a bridge (2x 2 lines). To remove this lines you may need a hobby knife or pliers - or just leave it as it is
Two cage segments are connected with two single lines - you can remove it with your finger nail. Those lines are for a better stabbility
---