Sumo Bot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed a custom robo sumo bot in fusion 360 with a 30 degree inclined wedge :).
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 86
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Robo Sumo Bot :
What i made:
I designed robo sumo bot chasis with 30 degree inclined front wedge, motor mount , top plate and enough space to fit electronics.
why i made:
As our national robo sumo competition is going to held on noveber so i made this for that event and to improve my skills in mechanical design.
How i made it :
I started by planning the robot by adding one base of 200x100m where i added all the model of electronics. After that, i just added a new sketch to make the motor mount where i project the back surface of tt motor the i designed the mount. similarly, i make the whole designed of sumo bot with the help of model of electronics.
Assembly guide :
Required materials:
3D-printed main chasis
3D-printed top plate
tt motor & wheel
wheels
l298n motor driver
2s 18650 battery holder
jumper wire
switch
arduino uno
long range sharp ir sensor
tcrt5000
First and foremost, you have to print the main chasis body and top plate using 3d printer. After this, mount the motors onto the main chasis using screw and install the wheels on to the motor shaft. Moreover, place motor driver, battery holder, arduino uno and other required electronics onto the chasis. connect the motor to the motor driver and battery and all the electronics and upload the code. coding part is yours :),
And just place the top plate over the main chasis and secure it using screws.
Finally, the robot is ready to dominate the opponent bot :_)