1 / 4
Baby monitor camera Crib Mount — zdjęcie 1
1 / 4

Baby monitor camera Crib Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple and practical 3D-printed mount for installing a monitor directly on a baby crib.

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
18
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Baby Monitor crib mount

A simple and practical 3D-printed mount for installing a monitor  directly on a baby crib.

The mount attaches to the crib rail without drilling or permanently modifying the crib. The camera can be securely mounted and adjusted to the desired viewing angle.

 

Mount dimensions

The mounting bracket is designed for crib rails or other surfaces up to 40 mm thick.

  • Maximum mounting thickness: 40 mm

  • Suitable for baby cribs, bed rails and other similar surfaces

  • No drilling or permanent modification required

Camera mounting:

  • Use 2× M3×8 DIN 912 socket head cap screws. Adjust the screws to the correct height before installing the camera. Leave enough clearance for the camera to slide into the mount, while keeping the gap small enough for the screw heads to securely hold the camera.

Requirements 

For fixing the camera mount bracket:

  • 2× M3 × 8mm DIN 912 socket head cap screws

Features

  • Mounts directly to a baby crib rail

  • No drilling or permanent modifications required

  • Secure and stable design

  • Adjustable camera position

  • Easy to install and remove

  • Compact and lightweight

⚠ PETG is recommended for the printed mounting screw. PLA may crack at the thread if overtightened or if the platform is adjusted while the screw is tightened. Always loosen the screw before adjusting the platform angle.

Printing

  • Material: PLA / PETG

  • Layer height: 0.16 mm

  • Walls: 3–4

  • Infill: 15–25%

  • Supports: Required for one part only

  • Support settings are already configured in the included 3MF file

Tagi