Pegboard Parts Bins — 2 Pack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two front-opening parts bins for pegboard walls. Great for screws, bits, SD cards, random hardware. Pins included.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Two front-opening pockets for all the little stuff — screws, nuts, driver bits, SD cards, whatever lives in your "misc" pile.
- front-opening so you can grab things without unhooking the bin
- 3 mm walls; each bin sits on its own 4-hole plate, 8 included peg pins total
- about 185 x 95 x 60 mm for the pair, fits any 256 mm bed
Mounting: plates vertical, pins pressed through from the back into the board. A drop of super glue if anything feels loose.
Print settings: print it exactly as the file opens. 0.2 mm layers, 3 walls, 15% infill. PLA or PETG. No supports.
Designed parametrically in code — STEP file included for remixing.