tesla juniper standard armrest box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Center console bin insert for the Tesla Model Y "Juniper" Standard (2025/2026). Hangs from the molded ledges
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 1
- Wyświetlenia
- 75
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
A 3D-printed organizer insert for the deep armrest bin of the Tesla Model Y "Juniper" Standard center console.
The bin has a small ledge running along both long sides, just below the console surface. This insert has a matching lip that hangs into that ledge, so it sits flush with the top instead of dropping to the bottom of the bin — no glue or clips needed. The lower body is slightly tapered to grip the sides as it slides in.
Features:
Two upright slots side-by-side for credit/ID cards (fits a stack of ~18-20 cards)
Open coin channel along one side wall, sized for coins up to 2€
Printable fully support-free (coin channel underside is wedge-shaped by design)
Print settings: PETG (handles summer heat in a parked car), 0.2 mm layer height, 3 walls, 12% infill, no supports.
⚠ Sized for the Model Y Juniper Standard console — Tesla doesn't publish interior dimensions, and Premium/Performance consoles may differ slightly.