Shelf Bracket with Insertable Brace – 80 × 90 × 15 mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Regalwinkel 80 × 90 mm mit Steckstrebe – optional mit One-Piece-Logo.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 15
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This bracket is designed for mounting shelves. The L-shaped main part measures 80 mm along the shelf, 90 mm along the wall, and is 15 mm thick.
The bracket consists of two parts: an L-shaped bracket and a brace that is inserted after installation. For extra strength, you can replace the printed brace with one made from wood or metal.
One Piece logo version
This version includes a One Piece logo. Print the brace twice—once for the left side and once for the right side.
For a multicolour print, change the filament at these heights:
Above 1 mm: White
Above 2 mm: Yellow
Above 3 mm: Red
The colour sequence is black, white, yellow, red. You can also print the brace in a single colour or customise and extend it in Tinkercad.