Opal the Geode Frog | Cute ColorMix Companion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A little frog with a pastel crystal garden. Includes STL and a painted Prusa INDX ColorMix project.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Meet Opal, a tiny pond companion carrying a garden of pastel gems. With a gentle smile, rounded feet and soft green colouring, this little geode frog belongs beside Pebble, Mica and Jasper—or on a desk of their own.
Included files
• STL for single-colour printing or your own palette.
• Painted 3MF for Prusa CORE One INDX 8T with ColorMix virtual colours.
The supplied project is 70 mm long, with 0.10 mm layers, two perimeters, 10% gyroid infill, supports and a brim. Open the 3MF using File → Open Project in PrusaSlicer to retain the virtual colours and printer setup.
Spool order: 1 Cyan, 2 Magenta, 3 Yellow, 4 White, 5 Black, 6 Gold, 7 Silver, 8 Prusa Orange. The palette uses mint, cream-white, rose, lavender and aqua. Gold and silver are available in the setup but are not used by this colour scheme. Match your loaded tools before slicing.
Use the Prusament ColorMix filaments for the mixed shades. Colours vary with filament, lighting and viewing angle; fine layers help the blends read more smoothly. Remove the supports gently around the toes and crystal edges.
Share a Make to show your own Opal and colour choices!
CC BY-NC-SA 4.0 — free personal printing and noncommercial remixes with attribution and the same licence. Commercial sales are reserved.