25mm Pipe Connectors (Reinforced, Angled Design for Higher Strength)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A set of heavy-duty connectors designed specifically for 25 mm pipes. The primary goal of this design is to maximize the
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This project features a set of heavy-duty connectors designed specifically for 25 mm pipes. The primary goal of this design is to maximize the mechanical strength of 3D prints.
Standard connectors printed in a standard vertical or horizontal orientation often snap along the layer lines under stress (delamination). In this design, the connector geometry has been rotated and engineered at a special angle, allowing for an optimal orientation of print layers (material anisotropy) relative to the forces acting on the structure. As a result, these joints are significantly stronger, highly resistant to bending, and less prone to cracking.