Pearl the Gem Seahorse | Cute ColorMix Companion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A peach-and-cream seahorse with aquamarine gems. Includes STL and a painted Prusa INDX ColorMix project.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 29
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Meet Pearl, a gentle little seahorse with aquamarine gems, a lavender crown and a curled tail resting on a pebble base. A peach-and-cream ocean friend for Pebble, Mica, Jasper and Opal.
Included files
• STL for single-colour printing or your own palette.
• Painted 3MF for Prusa CORE One INDX 8T with ColorMix virtual colours.
The supplied project is 90 mm tall, with 0.10 mm layers, two perimeters, 10% gyroid infill, supports and a brim. Open the 3MF using File → Open Project in PrusaSlicer to retain the virtual colours and printer setup.
Spool order: 1 Cyan, 2 Magenta, 3 Yellow, 4 White, 5 Black, 6 Gold, 7 Silver, 8 Prusa Orange. Gold and silver are available in the setup but are not used by this colour scheme. Match your loaded tools before slicing.
Use the Prusament ColorMix filaments for the mixed shades. Colours vary with filament, lighting and viewing angle; fine layers help the blends read more smoothly.
Remove the supports gently around the snout, fin and curled tail. Share a Make to show your own Pearl and colour choices!
CC BY-NC-SA 4.0 — free personal printing and noncommercial remixes with attribution and the same licence. Commercial sales are reserved.