1 / 5
SpeedDrive for Hero Me Gen5 + BMG Mirror / Left handed + Ender3/5/CR-10/S (Pancake compatible) — zdjęcie 1
1 / 5

SpeedDrive for Hero Me Gen5 + BMG Mirror / Left handed + Ender3/5/CR-10/S (Pancake compatible)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I ordered a left handed / mirror version of the BMG Extruder by mistake. Had to make a ~8.34 mm offset to the right of…

Ocena
0 / 5
Polubienia
2
Pobrania
25
Wydruki
0
Wyświetlenia
385
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I ordered a left handed / mirror version of the BMG Extruder by mistake. Had to make a ~8.34 mm offset to the right of the top part so that the extruder would be aligned with the hot end.

Original description :

Direct Drive Adapter for Bondtech BMG extruder and the Hero Me Gen5 on an Ender 3 series, Ender 5 series, or CR-10/S.

This should work with all Hero Me Gen5 compatible hot-ends as they are all positioned in the same place.

This won't work without a pancake stepper motor unless you move your x end stop and limit the build zone quite a bit. I used a 22mm motor.

Category: 3D Printer Parts

Tagi