Resin Validation Matrix x8 for the Elegoo Saturn 4 Ultra 16K Exposure Calibration
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
8 resin validation test files set up for the Saturn 4 Ultra 16K's built-in exposure calibration
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 102
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial
This file has 8 of the photonsters resin validation matrixes pre-aligned for the built-in exposure/calibration test on the Elegoo Saturn 4 Ultra 16K. Each part is embossed with numbers 1 - 8, no more mixing up pieces or scribbling with sharpies. Just center it on the build plate and start printing.
Important steps to follow for this to work:
The print must have four or less base exposures for the test to work correctly.
When entering the exposure times on your saturn you MUST set section 1 to the longest exposure time you want to test, and the subsequent sections MUST all be set to shorter times in numerical order ending with section 8 as the shortest exposure time, i.e. section 1 at 10 seconds, section 2 at 9 seconds, section 3 at 8 seconds, etc.
This may also work on the Saturn 4 Ultra 12K but I have not tested it, feedback appreciated.
remixed from: https://www.printables.com/model/229429-photonsters-validation-matrix-v2
credit to photonsters for making the original test file