Guider 2S HEVO improved mounting towers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Widened mounting holes for heat inserts. Fixed 1mm distance deviation. Added mirrored parts. Improved base size.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 9
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Improved mounting towers for the FlashForge Guider 2S HEVO/CoreXY conversion.
This remix corrects the 1 mm hole-spacing discrepancy found in the original towers and replaces the self-tapping frame-mounting holes with 5.8 mm holes designed for heat-set inserts. The steel-rod holes have been changed to a teardrop shape for improved print quality and easier fitting. The front mounting bases have also been shortened, unnecessary holes have been removed, and mirrored versions are included for a complete installation.
Improvements over the original:
Corrected heat-insert hole spacing to match the motor mounts
5.8 mm mounting holes for heat-set inserts
Teardrop-shaped steel-rod holes for improved fit
Shorter front-mount base plates
Only the required holes retained on each part
Mirrored parts included
