1 / 2
Simple Lens Cap for Open Astro Guider v3.1 — zdjęcie 1
1 / 2

Simple Lens Cap for Open Astro Guider v3.1

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Just a simple lens cap for the Open Astro Guider v3.1

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
10
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Public Domain

Made a quick lens cap in blender, nothing more.

Fit might be a bit tight, consider scaling the model up a tiny bit in the slicer if your printer tends to print a bit smaller than it should. But not too much as it will flop around if its not tight enough.

Tagi