LilyGo T5 Paper Pro Case w/ Quad Lock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for the LilyGO/T5S3-4.7-e-paper-PRO, includes Quad Lock compatible case as well as a regular one.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This model was created with OpenTrailPaper in mind that uses the LILYGO T5-4.7-S3 E-Paper Pro as a bike computer. I've included models with buttons and without, as well as versions with a Quad Lock connector.
You will need to print the bottom portion with the Quad Lock connector in PETG and the rest in TPU to ensure a good connection to the mount and the flexibility needed to insert the device. Using beam interlocking would decrease the chances of the two materials separating while twisting it on and off but increases the chance of failure when using an AMS. You will need to print this with supports.
For the non-Quad Lock variant you should print in TPU with supports.