Orangewood Juniper Guitar Bridge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A printable alternative to the rubber bridge.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution
A printable guitar bridge to substitute the original rubber bridge. The FreeCAD file is included if you want to modify the parameters to change the action height. The STL included will give very low action.
Depending on the material and wall thickness, there could be a variety of sounds generated, but it will generally sound more tinny and bright than the very muted rubber bridge.
I printed in PETG with 3 walls.
Place the printed bridge toward the back of the wooden saddle to get the intonation correct.
I used a small sharp file to create small notches for the strings to rest in once I had them where I wanted.