1 / 3
passive speaker model for 2.5inch driver. — zdjęcie 1
1 / 3

passive speaker model for 2.5inch driver.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

a small printable passive speaker box that holds a single 2.5inch driver.

Ocena
0 / 5
Polubienia
1
Pobrania
2
Wydruki
0
Wyświetlenia
10
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Test Models
Licencja
Creative Commons — Public Domain

a small printable passive speaker box that holds a single 2.5inch driver. wires routh out the back through the hole. which should be sealed with gap filler along with the back panel after it's pressed in the speaker is complete. and make sure to glue the 10mm by 3mm magnets into the main housing and the front panel. the foot needs to be printed 4 times and then thread them into there slot on the bottom of the speaker.