Helloween Goth Devil Horns Headband
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Helloween Goth Devil Horns Headband
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 212
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
😈 Goth Devil Horns Headband | Halloween & Cosplay Accessory
Unleash your dark side with this Goth Devil Horns Headband! Designed with an intricate, twisted gothic texture, this piece is the ultimate accessory for Halloween costumes, cosplay, gothic fashion, music festivals, or themed photoshoot props.
Engineered for comfortable, lightweight wear, it prints quickly and requires minimal assembly. Simply attach the horns to the included headband base for an instant alternative fashion statement!
The Model has been split with snap on connectors. Please Make sure that you resize it for your mesurments by using the percentage scale not the units one as you need to resize the entire model
🌟 Key Features
Intricate Gothic Detail: Unique stylized spiral horns with high-definition surface texture.
Lightweight & Ergonomic: Designed to stay firmly on your head without causing discomfort.
Print-in-Place / Easy Assembly: Fits seamlessly onto standard printer bed sizes.
Versatile Use: Ideal for Cosplay, Halloween, Festivals, Goth Aesthetics, and Costumes.
🛠 Recommended Print Settings & Profile
Below are the recommended print profile settings based on the model geometry and optimum strength-to-weight ratio:
Parameter | Recommended Value | Notes |
|---|---|---|
Layer Height | 0.16mm or 0.20mm | 0.16mm yields smooth curves on horn textures |
Infill Pattern | Gyroid or Grid | Gyroid provides uniform strength |
Infill Density | 10% – 15% | Keeps the headband light and comfortable |
Wall Loops / Perimeter | 3 | Ensures durability along thin curve sections |
Top / Bottom Layers | 4 Top / 3 Bottom | Clean top surface finish |
Supports | Tree Supports (Auto) | Required for horn overhangs and curved arch |
Support On Build Plate Only | Enabled | Prevents support scarring on detailed horn faces |
Brim | Auto / Mouse Ears | Recommended on tips if printing horns vertically |
Material Choice | PLA / PLA+ / PETG | PLA for crisp detail; PETG for extra flexibility |
🎨 Assembly & Post-Processing Tips
Carefully remove the Tree Supports starting from the base.
Sand any support interface spots lightly with 400-grit sandpaper if needed.
Paint with acrylics or spray paint (metallic red, matte black, or iridescent horn effects work amazingly!)