1 / 5
Fosi Audio ZA3 & ZH3 2in1 power brick enclosure — zdjęcie 1
1 / 5

Fosi Audio ZA3 & ZH3 2in1 power brick enclosure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I hate bulky power bricks, so I overengineered a 2in1 solution for my audio setup.

Ocena
0 / 5
Polubienia
7
Pobrania
11
Wydruki
0
Wyświetlenia
968
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

It's a Fosi audio DAC & Amp setup which normally has a 12V and a 48V power brick, the latter being huge. I designed an enclosure that perfectly fits into the audio tower and houses both PSUs with a single mains connector. Was a fun weekend project.

I should have taken a "before" picture, just image a big mess of wires, black power bricks and a power strip sitting in the back.

Printed on Prusa machines with MMU3 from PLA (front and back plates) and PCTG (main body - I had doubts PLA would withstand the heat from the PSUs). The rubber feet are printed in TPU. The grid was printed with a 0.25mm nozzle.