LTT Water Bottle 40oz Bump Sleeve with AirTag Pocket (21oz & 64oz coming)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A TPU sleeve for the LTT Insulated Waterbottle. Setting it down is now a lot quieter. Version with AirTag Pocket!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 64
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
21oz and 64oz versions are in the works, check back in a bit!
My LTT water bottle was a bit too loud for me when setting it down on a table.
This bump sleeve not also quiets it down a lot but also protects your hydration container from dents and scratches.
I did not print a full AirTag version since I don't use one. The fit is perfect nonetheless. See the CAD image below for a full look at the sleeve:

Printing
I printed mine in 90A TPU (95A if you want it a bit harder). No other special settings.
If you're printing the AirTag version I'd recommend an infill of 20-30%. Since the bottom of the sleeve is now a lot thicker it needs more material to be stable.
I included a STEP version of the smooth sleeve if you want to put your own pattern on it.