Upcycled ATX Bench Power Supply
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Convert an ATX PSU into an Bench Power Supply
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 249
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
After looking trough some other Models, I desided to make my own. The main change is that I put heat set inserts on both sides of the legs. That makes it less critical if the two face plates warp a little bit. Converting the ATX PSU allows you to create multiple voltage outputs, including a variable 0.5-30V output and stable 3.3V, 5V, and 12V rails. Additionally, there are the usb ports for devices that would need it and require 5V power. It's a good way of having a use for old Power Supplys that would otherwise be thrown away.
Materials List
Below is a list of parts needed, including how many and links for purchase.
3D Printed Parts (1x Front Plate, 1x Back Plate, 1x Cage, 4 Legs)
Banana Socket x8 (small version)
Crimp Connectors x12 (get a set, I used 4 Quick-disconnect blade Terminals, and 8 Ring Terminals)
Ferrules x4 (For the connection on the Buck Boost Converter)
Any ATX PSU (Non-modular)
Disclaimer
Please note that this project involves working with electrical components and power supplies, which can be dangerous if not handled properly. Ensure you follow all safety precautions and double-check your work. I am not responsible for any damage, injury, or loss that may occur as a result of following this guide. Proceed at your own risk and always prioritize safety.